Archive for September, 2011

Fybroc Division Fiberglass Vertical and Cantilever Pumps SERIES 5500 VERTICAL FIBERGLASS SUMP PUMPS Capacities to 5000 GPM (1140 m3/hr) Heads to 275 feet (85 m) Pump lengths to 30 feet (9.1 m) Eighteen Standard Sizes Custom built to match customer pit/sump requirements Sump pumps are furnished in lengths (settings) from 18 inches to thirty feet […]

Background Project managers at the Texas Instruments West Building in Sherman, Texas needed a new scrubber yard to replace some older existing systems and allow for added flow capacity. They required three (3) new 20,000 CFM scrubbers with internal recirculation and redundant pumps uniquely arranged with inlet and outlet plenums and dampening systems so that […]

Problem: Customer had several bins they fill with catalyst on a continual basis. A small filter was required to vent the displaced gas. Space and head room was at a premium and they did not want to modify the bins. Solution: A single pleated filter bin vent was designed to mount directly on the customer’s […]

Aerovent has a “concrete” solution for cooling gases in the making of cement Smith Engineering’s gas cooler heat exchangers provide a safe and effective way to exhaust clean air from cement gases Cement has a long history that dates back to the Egyptians, who used a form of gypsum with water to create stone blocks […]

Seepex pump provides an economical solution to pumping gas The Anschutz Ranch in Evanston Wyoming is an old gas field that has been operating for almost twenty years. The natural gas is trapped in the porous rock like water in a sponge. As the gas is removed it also draws out a large amount of […]