Smoot Hopper-Top Diverter Valves – Series II

Smoot Hopper-Top Diverter Valves – Series II

The Series II Hopper-Top Diverter Valve is used to divert material from the convey line into a scale hopper or bin, while simultaneously allowing the conveying air to continue to be vented down the convey line. The unique transition design makes use of an 8-inch, resilient seated butterfly valve for diverting or bypassing the selected bin without leakage from the convey line while maintaining a minimal stack up height.


  • Carbon steel or stainless steel housing contruction
  • NEMA 4, 4X, or 7/9 Disk available in nickel-plated ductile iron, aluminum/bronze disk with stainless-steel shaft, or 316 stainless steel disk and shaft
  • Valve body available in cast iron, aluminum/bronze, or 304 stainless steel
  • Seat construction available in EPDM food-grade, white buna-n food-grade, or viton GF
  • Most types of limit switches are available
  • Valve alignment holes conform to 125-150# ASA pipe flange
  • Minimum 80 PSI plant air required

For help with Smoot Series II Hopper-Top Diverter Valves, contact Fluid Engineering at 800.841.9944.

Comments are closed.