Donaldson® Torit® Clears the Smoke at United Gear & Assembly
The WSO Mist Collector dramatically reduces oily smoke
INDUSTRY: Machining
PROBLEM: Excessive smoke generated from hobbers during the gear production process
SOLUTION: Donaldson Torit WSO Mist Collector significantly reduced the amount of smoke in the plant, maintenance time, and cost
How many gear hobbers does it take to fill a 24,000 square foot room with smoke in less than 20 minutes? Just one.
United Gear & Assembly, Inc. (UGA) manufactures gears and shafts for motors, generators, transmissions and drive trains used by OEM manufacturers worldwide, including custom gear and shaft products designed to meet rigid specifications. The company’s Hudson, Wisconsin manufacturing plant needed to reduce the amount of smoke generated from its hobbers during the gear production process.
Hobbing is a multipoint machining process in which gear teeth are progressively generated by a series of cuts with a helical cutting tool called a hob. Gear hobbing uses sulfuric oil, which generates a high degree of smoke. Dry hobbing, while cutting down on the amount of oil used, still generates excessive smoke when the gears are cleaned with compressed air.
“We run a lot of short jobs right now, which include 300 – 5,000 parts per month per machine,” said Tom Huppert, in charge of maintenance at United Gear & Assembly, Inc. “The sulfuric oil used in our gear hobbers was generating too much smoke – our facility was filling up in just a few minutes. And while our dry hobbers use less oil, they also generated a lot of smoke. Our people were complaining, and we needed a way to stop it.”
“We mounted a WSO-15 right on our gear
hobber and it did the trick. We had tried other collectors. They
vibrated too loudly, their filters had to be changed too often – which
added to our cost – or parts and service were not immediately available
to us. The Donaldson WSOs have far met our expectations in all levels of
performance.”
UGA installed its first Donaldson® Torit® WSO Mist Collector two years ago and achieved immediate success. The WSO provides filter solutions for the three mist categories: watersoluble coolants, straight oil, and the most challenging—oily smoke. It can be configured to meet specific facility requirement, including machine mount, stand mount for a single machine, and ducted cellular and central systems. “ we mounted a WSO-15 right on our gear hobber and it did the trick,” continued Huppert. “We had tried other collectors. They vibrated too loudly, their filters had to be changed too often – which added to our cost – or parts and service were not immediately available to us. The Donaldson WSOs have far met our expectations in all levels of performance.”
The WSO uses revolutionary Synteq™XP media, which blends small and large fibers with a proprietary, resin-free bonding system that provides high efficiency, low operating pressure and long filer life when compared to traditional filters. “The WSO mist collector has been running for two years and we’ve only had to change the filter once,” said Huppert. “For the amount of smoke our hobbers generate, that’s better than we expected. Both our maintenance time and cost have been significantly reduced, and our employees are no longer complaining about the smoke in our facility.”
Today UGA has six Donaldson Torit WSO mist collectors and plans to add more.
To learn more about Donaldson Torit WSO Mist Collectors, call Fluid Engineering at 800.841.9944.