Taylor Products Model V2100 Vertical Form Fill and Seal
A V-LINE Product
This economical, belt-driven form fill and seal equipment can handle any product requiring Laminate Film Structures (supported) and, Polyethylene Films (unsupported), including: blended spices and seasonings, blended flour, coffee, snack foods, candy, chemicals and liquids.
Up to 15 lbs per Bag, 70 Bags per Minute
- Forms and fills 2 oz to 15 lb packages
- Package sizes from 2.16 in by 3.15 in to 8 in by 13.7 in
- No tool size change-over and positioning
- Common, off-the-shelf components
- Allen Bradley PLC control
| Size | 46.00 in x 66.00 in x 55.125 in (1,168.4 mm x 1,676.4 mm x 1,400.2 mm) |
| Weight |
1,763.7 lbs (800 kg) |
| Minumum Package Size |
2.15 in x 3.15 in (55 mm x 80 mm) |
| Maximum Package Size |
8.00 in x 13.70 in (203 mm x 330 mm) |
| Maximum Roll Diameter |
14.0 in (355.6 mm) — 3 in (76 mm) cores |
| Maximum Speed |
70 BPM (Dependent upon product and packaging material) |
| Maximum Web Width |
17.0 in (431.8 mm) |
| Electrical Requirements |
220 Volt, 3 phase, 50/60 Hertz, 25 amps standard (other voltages available) |
| Pneumatic Requirements |
10-38 SCFM @ 100 PSI (6.8 BAR) dependent on speed |
| Frame Finish |
Carbon Steel with Electrostatic Powder Coat Finish |
| Product and Packaging Film Contact Areas |
304 Stainless Steel, all other surfaces anodized aluminum or nickel plated |
| Film Types |
Both supported and unsupported film can be run on the V2100 |
| Package Styles Available |
Pillow Reclosable, Vent Valve, Hole Punch, Header, Gusseted, Tear Notch, Square Bottom and Custom |
| Available Fillers |
Augers, Scales, Volumetric, Pumps, Counting Devices, and Custom |
| Warranty |
Two years on all manufactured components. Consult Standard Terms and Conditions for details |