WARREN RUPP® – Accessories
Liquid Level Controls from Warren Rupp®
Liquid Process Controllers for Every Application
Typical Applications:
• Moisture Collection
• Inventory Levels
• QC Tolerances
• Concentration
• Temperature
• Air Filtration
• Distance
• Vacuum
• Level
• Flow
Industry Proven on Demanding Applications:
• Chemical Processing and Petrochemicals
• Environmental
• Food Processing
• Manufacturing and Metalworking
• Water and Wastewater
LiquaVision®
Process Control with a Patented New View!
ON/OFF CONTROL & TWO ALARMS
Display and control liquids, bulk materials, temperature, differential
pressure, flow, concentration, Ph. distance and almost any other variable.
Available as a stand-alone, flush-mount unit for new and existing
enclosures or as a complete pre-wired system in a NEMA enclosure.
LiquaVision® accepts any type of 4-20mA process signal. For applications
that have foam, slurry, high temperatures, caustic chemicals and explosive
liquids, this control has a bubbler system with a 4-20mA analog output.
- Automatically maintains ON/OFF range for Make-up or Sump.
- High/Low Alarm Relays protect the application outside the range.
- Three security levels prevent unauthorized changes.
TwoView®
LEAD/LAG CONTROL & TWO ALARMS
Ideal for lift stations, water towers, compressor and vaacuum applications.
Alternate pumps automatically assign the primary pump and restrict unwanted
programming access with DIP switch selections. Both pump ranges “latch” internally; no
additional relays needed. Available as a stand-alone flush-mount unit or as a
complete pre-wired system in a NEMA enclosure. TwoView® accepts any type of
4-20mA process signal. For applications that have foam, slurry, high temperatures, caustic
chemicals and explosive liquids, Warren Rupp Vision Liquid Controls have a
bubbler system with a 4-20mA analog output.
- Alternates and “latches” pump ranges automatically.
- Maintains the tank level using two pumps/Make-up or Sump.
- High/Low alarms protect the application outside the range.
- Three security levels prevent unauthorized changes.
2Point®
PUMP AND ALARM or 2 ALARMS
Right to the point for an ON/OFF pump gange plus an alarm or when two
alarms are just right. Differential control of a single pump plus a high or low
alarm, or two alarms. DIP-switch configured for Makeup, sump and alarms. Can
be used with a Bubbler for control of slurry, caustics, high temperature, foam and
very shallow applications.
- In a NEMA 4 enclosure or flush mount.
- Accepts any type of 4-20mA sensor.
- Three security levels prevent unauthorized changes.
LevelAir®
WHEN FLOATS JUST WON’T FLOAT!!! REPLACE EXISTING
FLOAT AND PROBE CONTROL SYSTEMS!
No moving parts submerged in the tank to leak or foul. ON/OFF control can be as
narrow as 0.5 inch to maintain tight tolerances on temperature, chemical concentration
or overflow. Multiple control points are easily adjusted without contacting the liquid
or entering the tank. Air is provided by an internal compressor, eliminating plant air! Solid state
controls and a process sensor replace the old-fashioned pressure switches and gauges.
- No moving parts submerged in the tank to leak or foul.
- ON/OFF control can be as narrow as 0.5 inch.
- Multiple control points are easily adjusted.
- Solid state controls and a process sensor install.
- Mount LevelAir®, a bubbler tube and connect 120VAC.
KLC –PROPORTIONAL LEVEL CONTROL
NO ELECTRIC REQUIRED AND NO MOVING PARTS!
KLC® will proportionally modulate any pneumatic valve or actuator, providing
a constant tank level. Replaces variable speed pumps and expensive analog valve
actuators. Easily operates in thick slurry, caustic chemicals, foam and explosive
environments. Installation is simple. Mount the KLC, connect plant air to one side,
connect the other side to the valve and mount the sensing probe in the tank. As the level increases
or decreases, the valve immediately responds. Eliminates surges and hammering that are typical in
ON/OFF control.
- No electric required and no moving parts.
- KLC® will proportionally modulate any pneumatic valve or actuator.
- Replaces variable speed pumps and expensive analog valve actuators.
- Operates in thick slurry, caustic chemicals, foam and explosive environments.
- Installation is simple.
- Eliminates surges and hammering that are typical in ON/OFF control.